OUR TECHNOLOGY

Advanced water treatment, one flexible fleet

Ecolutia provides flexible, high-performance water treatment for demanding industrial applications. Our mobile fleet combines advanced technologies to deliver high-quality water, from short-term needs to multi-year projects.

THE FLEET

Ecolutia Mobile Water Treatment Solutions

Our portfolio of outsourced mobile water treatment systems is perfect for both temporary and long-term water treatment projects.

RAPID RESPONSE

Demineralization

HydroPURE™ Series

600 GPMhigh-quality demineralized water

A range of trailer-mounted Rapid Response systems offering the largest mobile demineralization capacity on the market. Systems can be commissioned and operational within an hour of arrival on site — with resins regenerated off site, so no chemical handling or wastewater production at your plant.

DI water purity < 0.1 µS/cm, < 10 ppb SiO₂

Demineralization output up to 600 GPM

Softening output up to 600 GPM(< 1 ppm hardness)

Filtration output up to 1,000 GPM

Condensate polishing output up to 600 GPM

Oxygen removal output up to 600 GPM(< 5 ppm dissolved oxygen)

Carbon absorption output up to 600 GPM

Flow rate and quality is dependent on application.

ENQUIRE ABOUT HYDROPURE

Dissolved air flotation

Atlas Series

3,000 GPMclarified water

Mobile DAF pretreatment technologies for large volumes of water with high or variable turbidity. Continuous removal of large-molecule suspended solids, emulsified oils, and microbiological matter prevents fouling of downstream equipment. Production of highly consistent filtrate quality water with low-SDI in a fraction of the footprint of conventional clarification technologies.

Product water flow rate up to 3,000 GPM

Product water quality (pre-filter) < 1–3 NTU

Product water quality (post-filter) < 1 NTU, SDI₁₅ < 3

Flow rate and quality is dependent on application.

ENQUIRE ABOUT ATLAS

FILTRATION

MODULAR

Containerized solution

Proteus Series

1,300 GPMindustry-leading flow rate

A mobile, containerized solution available in many modular combinations — filtration, softening, demineralization, condensate polishing, de-oxygenation and carbon absorption. Delivered pre-loaded with the specified treatment media, ready to work immediately, with both on-site and off-site regeneration options.

Softening output up to 1,300 GPM(< 1 ppm hardness)

Filtration output up to 900 GPM

Demineralization output up to 800 GPM

Condensate polishing output up to 1,000 GPM

Oxygen removal output up to 800 GPM(< 5 ppm dissolved oxygen)

Carbon absorption output up to 800 GPM

Flow rate and quality is dependent on application.

ENQUIRE ABOUT PROTEUS

Reverse osmosis

Triton Series

700 GPMmax flow

Mobile reverse osmosis for both brackish water and seawater. The Triton SWRO144 produces more fresh water than any other standalone mobile containerized RO system — handling salinities from 15,000 to 50,000 TDS — while the BWRO range delivers brackish water flows up to 700 GPM with recoveries up to 90%.

Single pass up to 700 GPM

Double pass up to 300 GPM

Recovery up to 80%

Rejection up to 99%

Electrical consumption < 3.4 kWh/kgal

Flow rate and quality is dependent on application.

ENQUIRE ABOUT TRITON

DESALINATION

ULTRA-PURE

Electro-deionization

Volturnus Series

800 GPMhigh-purity demineralized water

A modular, chemical-free EDI system removing up to 99% of residual salts and ionic contaminants — with no regeneration chemicals, no shutdowns and no hazardous by-products. Highly effective as a post-RO polishing stage for ultrapure applications, with 24/7 integrated data monitoring. Available in single or four skid based configurations to suit smaller or larger projects requirements.

Pure water flow rate 40–800 GPM

DI water purity < 0.1 µS/cm

Product water quality < 10 ppb SiO₂

Recovery up to 95%

Modular stack setup up to 4 × 200 GPM

Flow rate and quality is dependent on application.

ENQUIRE ABOUT VOLTURNUS

Ecolutia fleet at a Glance

SERIES	TECHNOLOGY	TREATMENT STEP	PURPOSE	FLOW RATES
HydroPURE™	Ion Exchange	Emergency demin polisher	Charged resin to remove dissolved ionic matter	50–600 GPM
Atlas	Dissolved Air Flotation	Primary filter	Air, physical and chemical clarification to remove suspended solids	up to 3,000 GPM
Atlas	Ultrafiltration	Primary filter	Membrane separator of suspended solids	up to 600 GPM
Proteus	Multi-media Filtration	Secondary filter	Granular media to remove dissolved matter	up to 1,300 GPM
Triton	Sea Water Reverse Osmosis	Treatment process	Membrane removal of dissolved ionic salts	130–260 GPM
Triton	Brackish Water Reverse Osmosis	Treatment process	Membrane removal of dissolved ionic salts	100–700 GPM
Volturnus	Electro-deionization (EDI)	End stage polisher	Electro-ionic-membrane separator of dissolved salts	30–800 GPM

HYDROPURE™

Ion Exchange

Treatment stepEmergency demin polisher

PurposeCharged resin to remove dissolved ionic matter

Flow rate50–600 GPM

ATLAS

Dissolved Air Flotation

Treatment stepPrimary filter

PurposeAir, physical and chemical clarification to remove suspended solids

Flow rateup to 3,000 GPM

ATLAS

Ultrafiltration

Treatment stepPrimary filter

PurposeMembrane separator of suspended solids

Flow rateup to 600 GPM

PROTEUS

Multi-media Filtration

Treatment stepSecondary filter

PurposeGranular media to remove dissolved matter

Flow rateup to 1,300 GPM

TRITON

Sea Water Reverse Osmosis

Treatment stepTreatment process

PurposeMembrane removal of dissolved ionic salts

Flow rate130–260 GPM

TRITON

Brackish Water Reverse Osmosis

Treatment stepTreatment process

PurposeMembrane removal of dissolved ionic salts

Flow rate100–700 GPM

VOLTURNUS

Electro-deionization (EDI)

Treatment stepEnd stage polisher

PurposeElectro-ionic-membrane separator of dissolved salts

Flow rate30–800 GPM

ENGINEERED FOR YOUR WATER

Let's match the right system.

REQUEST A CONSULTATION