OUR TECHNOLOGY

Advanced water treatment, one flexible fleet

Ecolutia provides flexible, high-performance water treatment for demanding industrial applications. Our mobile fleet combines advanced technologies to deliver high-quality water, from short-term needs to multi-year projects.

THE FLEET

Ecolutia Mobile Water Treatment Solutions

Our portfolio of outsourced mobile water treatment systems is perfect for both temporary and long-term water treatment projects.

RAPID RESPONSE

Demineralisation

HydroPURE™ Series

130 m³/hhigh-quality demineralised water

A range of trailer-mounted Rapid Response systems offering the largest mobile demineralisation capacity on the market. Systems can be commissioned and operational within an hour of arrival on site — with resins regenerated off site, so no chemical handling or wastewater production at your plant.

DI water purity < 0.1 µS/cm, < 10 ppb SiO₂

Demineralisation output up to 130 m³/h

Softening output up to 130 m³/h(< 1 ppm hardness)

Filtration output up to 225 m³/h

Condensate polishing output up to 130 m³/h

Oxygen removal output up to 130 m³/h(< 5 ppm dissolved oxygen)

Carbon absorption output up to 130 m³/h

Flow rate and quality is dependent on application.

ENQUIRE ABOUT HYDROPURE

Dissolved air flotation

Atlas Series

680 m³/hclarified water

Mobile DAF pretreatment technologies for large volumes of water with high or variable turbidity. Continuous removal of large-molecule suspended solids, emulsified oils, and microbiological matter prevents fouling of downstream equipment. Production of highly consistent filtrate quality water with low-SDI in a fraction of the footprint of conventional clarification technologies.

Product water flow rate up to 680 m³/h

Product water quality (pre-filter) < 1–3 NTU

Product water quality (post-filter) < 1 NTU, SDI₁₅ < 3

Flow rate and quality is dependent on application.

ENQUIRE ABOUT ATLAS

FILTRATION

MODULAR

Containerised solution

Proteus Series

300 m³/hindustry-leading flow rate

A mobile, containerised solution available in many modular combinations — filtration, softening, demineralisation, condensate polishing, de-oxygenation and carbon absorption. Delivered pre-loaded with the specified treatment media, ready to work immediately, with both on-site and off-site regeneration options.

Softening output up to 300 m³/h(< 1 ppm hardness)

Filtration output up to 175 m³/h

Demineralisation output up to 200 m³/h

Condensate polishing output up to 280 m³/h

Oxygen removal output up to 180 m³/h(< 5 ppm dissolved oxygen)

Carbon absorption output up to 175 m³/h

Flow rate and quality is dependent on application.

ENQUIRE ABOUT PROTEUS

Reverse osmosis

Triton Series

160 m³/hmax flow

Mobile reverse osmosis for both brackish water and seawater. The Triton SWRO144 produces more fresh water than any other standalone mobile containerised RO system — handling salinities from 15,000 to 50,000 TDS — while the BWRO range delivers brackish water flows up to 160 m³/h with recoveries up to 90%.

Single pass up to 160 m³/h

Double pass up to 70 m³/h

Recovery up to 80%

Rejection up to 99%

Electrical consumption < 0.9 kWh/m³

Flow rate and quality is dependent on application.

ENQUIRE ABOUT TRITON

DESALINATION

ULTRA-PURE

Electro-deionisation

Volturnus Series

200 m³/hhigh-purity demineralised water

A modular, chemical-free EDI system removing up to 99% of residual salts and ionic contaminants — with no regeneration chemicals, no shutdowns and no hazardous by-products. Highly effective as a post-RO polishing stage for ultrapure applications, with 24/7 integrated data monitoring. Available in single or four skid based configurations to suit smaller or larger projects requirements.

Pure water flow rate 8–200 m³/h

DI water purity < 0.1 µS/cm

Product water quality < 10 ppb SiO₂

Recovery up to 95%

Modular stack setup up to 4 × 50 m³/h

Flow rate and quality is dependent on application.

ENQUIRE ABOUT VOLTURNUS

Ecolutia fleet at a Glance

SERIES	TECHNOLOGY	TREATMENT STEP	PURPOSE	FLOW RATES
HydroPURE™	Ion Exchange	Emergency demin polisher	Charged resin to remove dissolved ionic matter	10–130 m³/h
Atlas	Dissolved Air Flotation	Primary filter	Air, physical and chemical clarification to remove suspended solids	up to 680 m³/h
Atlas	Ultrafiltration	Primary filter	Membrane separator of suspended solids	up to 150 m³/h
Proteus	Multi-media Filtration	Secondary filter	Granular media to remove dissolved matter	up to 300 m³/h
Triton	Sea Water Reverse Osmosis	Treatment process	Membrane removal of dissolved ionic salts	30–60 m³/h
Triton	Brackish Water Reverse Osmosis	Treatment process	Membrane removal of dissolved ionic salts	27–160 m³/h
Volturnus	Electro-deionisation (EDI)	End stage polisher	Electro-ionic-membrane separator of dissolved salts	8–200 m³/h

HYDROPURE™

Ion Exchange

Treatment stepEmergency demin polisher

PurposeCharged resin to remove dissolved ionic matter

Flow rate10–130 m³/h

ATLAS

Dissolved Air Flotation

Treatment stepPrimary filter

PurposeAir, physical and chemical clarification to remove suspended solids

Flow rateup to 680 m³/h

ATLAS

Ultrafiltration

Treatment stepPrimary filter

PurposeMembrane separator of suspended solids

Flow rateup to 150 m³/h

PROTEUS

Multi-media Filtration

Treatment stepSecondary filter

PurposeGranular media to remove dissolved matter

Flow rateup to 300 m³/h

TRITON

Sea Water Reverse Osmosis

Treatment stepTreatment process

PurposeMembrane removal of dissolved ionic salts

Flow rate30–60 m³/h

TRITON

Brackish Water Reverse Osmosis

Treatment stepTreatment process

PurposeMembrane removal of dissolved ionic salts

Flow rate27–160 m³/h

VOLTURNUS

Electro-deionisation (EDI)

Treatment stepEnd stage polisher

PurposeElectro-ionic-membrane separator of dissolved salts

Flow rate8–200 m³/h

ENGINEERED FOR YOUR WATER

Let's match the right system.

REQUEST A CONSULTATION